AEG OKO-LAVAMAT 88830 User Information page 36

Operating Instructions
Problem
Remnants of detergent
are building up in the
detergent drawer.
The rinsing water is
murky.
No illumination when
pressing an additional
program.
L
Only
minated from behind.
Only X (DURATION) is
illuminated from be-
hind. A number bet-
ween 1 and 19 is
shown in the display X
(DURATION).
The program sequence
indicator flashes con-
stantly.
36
Water valve not fully opened. Open the water valve fully.
Filter in the screw connec-
tion of the intake hose on
the water valve or on the
unit is blocked.
The cause is probably a de-
tergent with a high silicate
content.
The selected additional pro-
gram cannot be combined
with the set program.
The washing machine is in
(END) is illu-
Stand-by mode.
Start time preselection run-
ning. The washing machine is
in Stand-by mode.
Program safeguard switched
on; The program selector was
accidentally readjusted dur-
ing the washing cycle.
Possible Cause Remedy
Close the water valve. Un-
screw the intake hose from
the water tap and from the
unit. Clean the filter.
No negative impact on the
rinsing results, possibly use
liquid detergent.
Make another selection.
Press any button.
If you press any button the
machine will leave standby
mode.
Turn the program selector
back to the original position
(see "Program Saving").