Table of Contents
Advertisement
COMPUTER MODE
Press the MENU button and the ON-SCREEN MENU will
1
appear. Press the POINT LEFT/RIGHT buttons to select IMAGE
and press the SELECT button. Another dialog box PICTURE
IMAGE ADJUSTMENT Menu will appear.
Press the POINT DOWN button and a red-arrow icon will
2
appear. Move the arrow to the function that you want to select
and then press SELECT button.
Standard
Normal picture level preset on this projector. This picture level can
be set by pressing the NORMAL button.
Real
Picture level adjusted for the picture with fine tone.
Custom
Picture level adjusted manually in the custom setting dialog box.
When selecting " " the custom setting dialog box will appear. Move
the arrow to the item that you want to change by pressing the POINT
UP/DOWN button, and adjust each value by pressing the SELECT
button to match with the image.
Fine sync
Adjust the picture as necessary to eliminate flicker from the display.
(From 0 to 255.)
Total dots
The number of the total dots in one horizontal period. Adjust the
number to match your PC image.
White balance (Red / Green / Blue)
Move the arrow to the color that you want to adjust. Point to
lighten the color and select
Contrast
Point to
to decrease contrast, and select
(From 0 to 63.)
Brightness
Point to
to adjust the image darker, and select
brighter. (From 0 to 63.)
Sharpness
Point to
to soften the image, and select
(From 0 to 15.)
Gamma
Point to
or
to obtain better balance of contrast. (From 0 to 16.)
Progressive
Set "On" to provide progressive scan mode.
Each of the keys operates as follow.
Reset
Recalls the data previously adjusted.
Stored
Stores the adjusted data in the memory.
Quit
Closes the PICTURE IMAGE ADJUSTMENT Menu.
32
PICTURE IMAGE ADJUSTMENTS
to deepen the color. (From 0 to 63.)
to increase contrast.
to sharpen the image.
The level being selected.
to
to adjust
Close the PICTURE IMAGE
ADJUSTMENT Menu.
NOTE : The Fine sync and the Total dots cannot
be operated when the input signal is digital
from DVI terminal or "RGB" is selected on
the SYSTEM MENU (P28 and 29).
The Progressive cannot be selected when
the input signal is digital from DVI terminal
or "480p", "575p" or "HDTV720p" is
selected on the SYSTEM MENU (P28 and
29).
Move the arrow to the level
and press the SELECT
button.
Press the SELECT button
at " " to adjust the picture
level manually.
Move the arrow to
or
and press
SELECT button.
Press the SELECT
button to set the
function "On" or "Off".
Advertisement
Table of Contents
