Pioneer SERATO DJ DJM-900SRT Firmware Update Manual page 24

<STEP3> Start updating by pressing "START".
DO NOT remove power cable and/or LAN cable during the update.
If the Connect dialog box keeps appearing for 30 seconds or longer, the network
connection might not be established. Press the "EXIT" button and try connecting
the network again to update.
<STEP4> Make sure that the update process has been completed.
The following "SUCCESS" message appears on the VFD display if the update is
successfully completed.
<STEP5> Restart DJM-900SRT.
If any changes were made in the above "1. Change network settings" of this
chapter, please restore the network settings to the previous values.
- 24 -