Pioneer SERATO DJ DJM-900SRT Firmware Update Manual page 18

<STEP8> Right click the task bar and select "Properties".
<STEP9> Select "Notification area" and check "Network".
<STEP10> Close "Properties" by pressing the "OK" button.
2. Make sure that your DJM-900SRT and computer are connected
Find an icon on the task bar (right-bottom of your screen) to identify the connection status.
Message &
Icon
LAN cable is not connected.
Status of Make sure that the cable is properly
connection connected.
Identifying connection.
Wait for the connection to be
established. It may take about 1
minute.
- 18 -
DJM-900SRT is connected.
It is ready to start the update tool.