Using Flash - Polaroid i1037 User Manual

• Using Flash

When taking pictures in difficult lighting conditions, use the Flash button to
get correct exposure. This function cannot be activated in recording movies
or continuous shooting.
To activate Flash
• Press the Flash/Right button on your
camera repeatedly until your desired flash
mode is displayed on the LCD display.
Your camera is equipped with five flash modes:
Auto. The flash fires automatically
whenever extra lighting is needed.
Red-eye reduction. The flash fires
twice to reduce the red-eye effect.
Forced on. The flash fires whenever
you press the shutter button regardless
of lighting conditions.
Slow sync. The flash fires with a slow shutter speed.
Forced off. The flash is turned off.
NOTE:
• Flash function is only available in shooting still images but not available in Burst
and AEB modes.
• Do not charge the flash while pressing the zoom button. Charge the flash after
releasing the zoom button if necessary.
Polaroid i1037 Digital Camera User Guide
www.polaroid.com
SET
DISP
Auto flash is enabled.
10M
Flash button
307 307
29