Connectors, Jumpers And Slots; Floppy Disk Drive Connector: Fdd1; Fan Power Connectors: Cpufan1/Sys_Fan1 - MSI 845PE Neo Series Manual

Connectors, Jumpers and Slots

Floppy Disk Drive Connector: FDD1

The mainboard provides a standard floppy disk drive connector that
supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types.

Fan Power Connectors: CPUFAN1/SYS_FAN1

The CPUFAN1 (processor fan) and SYS_FAN1 (system fan) support
system cooling fan with +12V. It supports three-pin head connector. When
connecting the wire to the connectors, always take note that the red wire is the
positive and should be connected to the +12V, the black wire is Ground and
should be connected to GND. If the mainboard has a System Hardware Moni-
tor chipset on-board, you must use a specially designed fan with speed sensor
to take advantage of the CPU fan control.
MSI Reminds You...
Always consult the vendors for proper CPU cooling fan.
FDD1
GND
+ 12 V
S E NS O R
CPUFAN1
Hardware Setup
S E NS O R
+ 12 V
GND
SYS_FAN1
2-15