Trunk - Planet MGSW-2402 User Manual

10/100/1000mbps intelligent ethernet switch
Table of Contents

Advertisement

In the VLAN management window, you will see 2 VLANs in the page. To select a certain VLAN,
you can do the following:
Press ">>" button to display the next two VLANs
Press "<<" button to display the previous two VLANs
Press ">>|" button to display the last two VLANs
Press "|<<" button to display the first two VLANs
Enter the VLAN index in the "VLAN" edit box then press "Go to" button
You can add, edit and remove port members of each VLAN and then finally press "Apply"
button only once to configure the desired VLANs you want.
Note: if you want to set multiple VLANs, we suggest that you set Default VLAN ID for each port
first in Ports page.

3.8 TRUNK

Port trunking is the ability to group several 10/100Base-TX or 100Base-FX ports to increase the
bandwidth between this switch and another compatible switch. This is an inexpensive way to
increase bandwidth. We define port trunking as the ability to group set of ports (up to 8 ) within
the same module into a single logical link. The port trunk acts as a single link between switches.
Multiple trunks may be implemented in this switch, but only one trunk can be created within a
module.
Figure 3-6 The VLAN Page
Figure 3-7 The Trunk page
- 12 -

Advertisement

Table of Contents
loading

Table of Contents