Trunk/ Vlan Setting; Trunking Group Setting - Planet FNSW-1600S User Manual

There are six options available for the console setup:
(1) Trunk / VLAN Setting
(2) Port Status
(3) Port Setting
(4) Factory Setting
(5) Redundant Link
(6) Save Setting
To enter any of the sub-menu, simply follow the instruction and
type the number on the command line, and press ENTER.

4.2 Trunk/ VLAN Setting

Entry:
Select "1" from <Console Menu>
(1) Trunking (2) VLAN Setting (3) Exit >>
Purpose:
Set up the TRUNKING or VLAN Group
Be noted: the Switch support either TRUNKING or VLAN. As
soon as one is enabled, it also means the other is turned off at the
mean time.
Default:
No Trunking or VLAN Group in the device
.

4.2.1 Trunking Group Setting

Entry:
Select "1" from Sub Menu, press "ENTER"
4-port Trunk on Port 1/2/3/4
2-Port Trunk on Port 1/2
SWITCH in 1-VLAN mode
Trunk (1) Disable (2)2-Port (3)4-Port (4)Cancel Setting>>
Purpose:
Assign Trunk group setting option.
16
PLANET NOVASwitch series