Installation - Wolf SM2 Installation And Operating Instructions Manual

Solar module installation
Fixing holes
3062438_0309

Installation

- Remove the solar module from its packaging.
- Mount the solar module directly on the wall.
- Wire up the SM2 solar module in accordance with the wiring
diagram.
Note: Never route on-site cables/leads for temperature
sensor, flow meter and eBUS together with mains power
cables.
A programming module BM or BM-Solar can be clicked into the
solar module. As an alternative, the programming module can
also be used as a remote control unit in conjunction with a wall
mounting base.
No separate programming module is required if the solar module
is integrated into a Wolf control system that already contains a
programming module BM.
For further details, see the operating instructions of the
programming module BM or BM-Solar.
7