Safety Instructions - Wolf SM2 Installation And Operating Instructions Manual

Solar module
Table of Contents

Advertisement

Safety instructions

3062438_0309
Safety instructions
Auxiliary functions
Blocking cylinder reheating "solar boiler stop" ...................38
Blocking pasteurisation ................................................ 38-39
Anti-seizing pump protection ..............................................39
Loading the standard values (reset) ...................................39
Maximum cylinder and collector temperature over 24 h ....39
Hours run ...........................................................................39
Resetting values .................................................................39
Fault codes ...............................................................................40
Sensor resistances ...................................................................41
Specification .............................................................................42
Keyword index .................................................................... 43-44
The following symbols are used in conjunction with these important
instructions concerning personal safety, as well as operational
reliability.
"Safety instructions" are instructions with which you must comply
exactly, to prevent risks and injuries to individuals and material
losses.
Danger through 'live' electrical components.
Switch OFF the ON/OFF switch before removing the casing.
Never touch electrical components or contacts when the ON/OFF
switch is in the ON position. This results in a risk of electrocution
that may lead to injury or death.
The main supply terminals are 'live' even when the ON/OFF switch
is in the OFF position.
"Note" indicates technical instructions that you must observe to
Note
prevent material losses and boiler malfunctions.
3

Advertisement

Table of Contents
loading

Table of Contents