Power Alarm Configuration - Planet ISW-800M User Manual

alert to the dedicate SMTP server.
Power status: when the device power status has changed, the system will send out the alert
to the dedicate SMTP server.
SMNP Authentication Failure: when the SNMP authentication fail, the system will send out
the alert to the dedicate SMTP server.
Redundant Ring topology change: when the redundant ring topology has changed, the
system will send out the alert to dedicate SMTP server.
■ Port event selection: select the per port events. Per port has 3 selections - Link UP, Link Down, and
Link UP & Link Down. Disable means no event is selected.
Link UP: the system will send out an alert when port connection is up only.
Link Down: the system will send out an alert message when port connection is down only.
Link UP & Link Down: the system will send out an alert message when port connection is up
and down.
■ After selected, click

4.11.3 Power Alarm Configuration

Power alarm function enables the Relay alarm action. Without enabling power alarm function, the Relay
alarm action will not work even the Relay alarm is set. Mark the check box and click
.
Event Configuration interface
button.