Advertisement
Quick Links
Quick Start
Overview
f
WARNING!
Read all warnings, cautions, notes and installation instructions before installing or servicing this equipment.
This quick start provides the specifications and installation instructions for the NetVanta 1760-12F power supply unit (PSU), a 250 W hot-swappable redundant
power supply with both 12V and 12VSB outputs. This power supply functions only with the NetVanta 1760-12F Multi-Gigabit Fiber Aggregation switch (PN
17101763F1), which will hold two PSUs.
The following sections are included in this quick start guide:
■
"Overview"
on page 1
■
"Product Specifications"
on page 2
■
"Connecting to AC Power"
on page 2
■
"Additional Product Information"
f
WARNING!
WARNING indicates a hazard which, if not
avoided, could result in death, injury or
serious property damage.
NetVanta 1760-12F
Power Supply
Figure 1
describes the power supply and it's installation orientation in the NetVanta 1760-12F switch.
on page 3
Figure 1. 250 W Redundant Power Supply and the NetVanta 1760-12F
f
CAUTION!
CAUTION indicates a hazard which, if not
avoided, could result in service interruption,
damage to the equipment, or minor property
damage.
AC Power
Socket
Pull Bar
AC Status
Release
LED
Lever
g
NOTE
NOTES inform the user of additional, but
important, information or features.
June 2022
617101760PF1-13A
P/N: 17101760PF1
Faceplate covering
second PSU bay
Advertisement
Related Manuals for ADTRAN NetVanta 1760-12F
Summary of Contents for ADTRAN NetVanta 1760-12F
- Page 1 Read all warnings, cautions, notes and installation instructions before installing or servicing this equipment. This quick start provides the specifications and installation instructions for the NetVanta 1760-12F power supply unit (PSU), a 250 W hot-swappable redundant power supply with both 12V and 12VSB outputs. This power supply functions only with the NetVanta 1760-12F Multi-Gigabit Fiber Aggregation switch (PN 17101763F1), which will hold two PSUs.
- Page 2 12F switch; for mission critical operations where downtime needs to be minimized, this hot-swappable redundant AC power supply can protect against a single power supply failure. You can install up to two PSUs with matching airflow direction in the NetVanta 1760-12F switch. The PSUs operate in a load-sharing mode and provide 1+1 redundancy.
- Page 3 Installing the PSU(s) To install the PSU(s) in the switch, follow these steps: 1. From the rear of the switch, using a screwdriver, remove the two screws holding the faceplate covering the bay in which the power supply will be installed. Then, remove the faceplate.
- Page 4 ■ 2. This device must accept any interference received, including interference that may cause undesired operation. ■ Changes or modifications not expressly approved by ADTRAN could void the user's authority to operate this equipment. NOTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.