Maintenance - Makita EB5300TH Original Instruction Manual

The cruise control function allows the operator to
maintain a constant engine speed without pulling
the trigger lever. To increase the engine speed,
turn the stop control lever to high speed. To
decrease the engine speed, turn the stop control
lever to low speed.
2
1
Throttle trigger
speed, turn the throttle lever to high speed. To
decrease the engine speed, turn the throttle
lever to low speed.
Throttle lever
CAUTION:
NOTICE:
the machine.
NOTICE:
Transporting or storing in a position that is not
upright may cause oil to spill inside the blower
engine. This may result in oil leaks and white
smoke from burning oil, and the air cleaner
may become dirty with oil.
NOTICE:
Otherwise the blower housing
may be damaged.
Stop control lever
To increase the engine
1
It may damage

MAINTENANCE

CAUTION:
Otherwise the operator may suffer burn or
serious injury due to an accidental start-up.
CAUTION:
CAUTION:
Otherwise, there may remain a risk of scald.
the engine oil to return to the oil tank to ensure
accurate reading of the oil amount.
CAUTION:
NOTICE:
oil is regulated by law. In disposal, always fol-
low the relevant laws and regulations. For any
points remaining unknown, contact Authorized
Service Agent.
NOTICE:
replacement at regular intervals (replace with
new oil every 6 months).
Deteriorated engine oil shortens the life of the
sliding and rotating parts to a great extent.
Be sure to check the period and quantity of
replacement.
50 operating hours
17 ENGLISH
Disposal of
Perform inspection and
-
-