Advanced Settings; Change Master Pin; Registration; Unregister - Philips CD150 User Manual

Philips phone model cd150 user manual
Hide thumbs Also See for CD150:
Table of Contents

Advertisement

9

Advanced settings

9.1

Change Master PIN

The default Master PIN number is 0000.
The maximum length of the Master PIN is
8 digits. This PIN is also used to protect
the settings of your handset. Your
handset will prompt you whenever the
PIN is required.
Note
The default pin code is preset to 0000. If
you change this PIN code, keep the PIN
details in a safe place where you have easy
access to them. Do not lose the PIN
code.
m
1
Press
:
to
ADVANCED SET
<
, scroll
OK
<
and press
2
Enter the Master PIN when
prompted and press
confirm.
• The PIN entered will be shown as
asterisks (*) on the screen.
3
Enter the new PIN and press
to confirm.
• A validation tone is emitted and the
screen returns to previous menu.
Tip
If you forget your PIN, you will need to
reset your phone to its default settings.
See "Reset unit" on chapter 9.4 for more
details.
Advanced settings
key in idle mode, scroll
and press
:
to
CHANGE PIN
.
OK
<
to
OK
<
9.2

Registration

The procedures described below are the
procedures that you will find in your
handset. The procedures may vary
according to the handset you want to
register. In this case, please refer to the
manufacturer of the additional handset.
Additional handsets must be registered to
the base unit before you can use them. Up
to 4 handsets can be registered to one
base station.
1
Insert battery to power up the
handset. The LCD displays "
OK KEY TO REGISTER
2
Press
displays "
DURING 5s
3
Within 5 minutes, press the locator
key on base station to start
registration.
4
If registration succeeds, the handset
returns to idle mode.
5
If registration fails, the LCD will
display "
REGISTER
again.
OK
9.3

Unregister

1
Press
:
<
OK
and press
2
Scroll
number to unregister and press
• A validation tone is emitted to indicate
successful unregistration and the
screen returns to idle mode.
<
on handset, the LCD
OK
HOLD LOCATOR KEY
".
PRESS OK KEY TO
". Repeat the process
m
key in idle mode, scroll
to
ADVANCED SET
:
, scroll
to
UNREGISTER
<
.
OK
:
to select the handset
PRESS
".
and press
<
.
OK
31

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents