Dynamic Photo; To Create A Subject Image To Be Inserted - Casio Exilim EX-S200 User Manual

Dynamic Photo

You can use the procedures in this section to crop either a
moving subject or a still subject out of a snapshot and then
insert it into another snapshot or movie.
Moving Subject
To create a subject image to be inserted (Dynamic Photo)
1.
In the REC mode, press [SET].
2.
Use [8] and [2] to select the bottom Control Panel option (BS) and
then press [SET] (page 33).
3.
Use [8], [2], [4], and [6] to select the "Dynamic Photo" scene and
then press [SET].
4.
Press [SET], use [8] and [2] to select the third Control Panel option
from the bottom (Select Subject Type), and then press [SET].
5.
Use [8] and [2] to select "Subject Type", and then press [SET].
Another Image
101
Dynamic Photo Image
Dynamic Photo
™