Section 4. Machine Operation; Description - JLG 1930ES Operation & Safety Manual

4.1 DESCRIPTION

This machine is a self-propelled aerial work platform on
top of an elevating 'scissor' mechanism. The Scissor Lift's
intended purpose is to position personnel with their tools
and supplies at positions above ground level. The
machine can be used to reach work areas located above
machinery or equipment positioned at ground level.
The JLG Scissor Lift has a primary operator Control Sta-
tion in the platform. From this Control Station, the operator
MODEL ANSI/CSA
Max
Capacity
500 lb
1930ES
(227 kg)
800 lb
2030ES
(363 kg)
2630ES 500 lb
single cap (227 kg)
2630ES
800 lb
dual cap.
(363 kg)
to 20 ft
2630ES
500 lb
dual cap.
(227 kg)
to 26 ft
1000 lb
2646ES
(454 kg)
1000 lb
3246ES to
(454 kg)
26 ft.
Zone A
700 lb
3246ES to
(317 kg)
32 ft.
Zone B
3121165

SECTION 4. MACHINE OPERATION

Table 4-1. Capacities
CE INDOOR
Max Max Max
Persons Capacity Persons
2 230 kg 2
2 360 kg 2
2 230 kg 2
2 2
360 kg
2 230 kg 2
2 450 kg 2
2 450kg 2
2 320 kg 2
– JLG Lift –
SECTION 4 - MACHINE OPERATION
can drive and steer the machine in both forward and
reverse directions, raise and lower the platform and, if
equipped, operate the powered deck extension. The
machine has a Ground Control Station which will override
the Platform Control Station. Ground Controls operate lift
up and down. Ground Controls are to be used only in an
emergency to lower the platform to the ground should the
operator in the platform be unable to do so.
NOTE: All platform extension capacities are 250 lb (120 kg).
AUSTRALIAN
CE OUTDOOR
Max Max Max
Capacity Persons Capacity
120 kg 1 230 kg
160 kg 1 360 kg
N/A N/A 230 kg
N/A N/A
360 kg
N/A N/A 230 kg
230 kg 2 450 kg
320 kg 1 320 kg
320 kg 1 320 kg
AUSTRALIAN
INDOOR OUTDOOR
Max Max
Persons Capacity
2 120 kg
2 160 kg
2 N/A
2 N/A
2 N/A
2 230 kg
2 320 kg
2 320 kg
Max
Persons
1
1
N/A
N/A
N/A
2
1
1
4-1