Unpacking The Washer/Drayer - Whirlpool 7MWFC5090KC Use And Care Manual And Installation Instructions

Unpacking The Washer/Dryer
For questions or difficulties in installing and using the product,
Check how to contact us at point 5 of the Warranty Certificate.
■ Before you start installation, ensure that all packaging was
removed correctly as instructed on the label that comes in the
product packaging.
■ Remove the transparent plastic protective film from the panel.
■ Never use the Styrofoam-based product as this may damage
it.
22
Unpacking
1. With two people, place your Washer/Dryer near the
installation site. Do not pull the product through the
plastic tapes surrounding the packaging.
2. Cut the plastic tapes with safety scissors. Remove the
cardboard box pulling it up.
3. Remove the Styrofoam top from the product and
position it on the right side of the product.
4. Remove the Styrofoam edge protectors.
5. With two people, tip the product sideways, as indicated
by the arrow printed on the package, on the Styrofoam
top that you put on the right side of the product.
6. Remove the Styrofoam base. With two people, return the
product to the right position and remove the plastic bags
that protect your Washer/Dryer.
7. Dispose of the packaging consciously in an appropriate
place.