No Gui - CAMBRIONIX SS15 User Manual

Daisy chaining multiple PDsync-4 using expansion port
USB C cables can have variations in speed, power, and protocol capabilities. Some "active" or
E-mark type-C cables may not work on the daisy chain when connecting the expansion port to
another PDysnc-4. We recommend to use "passive" type-C cables and not to use cables fitted
with e-markers, see your cable supplier to see if e-markers are fitted.
Serial number on SuperSync-15
If you are using the API to write scripts using the SuperSync-15 then the serial number
produced using the method "cbrx_discover" will be an array of strings which will change when
the hubs connection is moved. Using firmware 1.80 and above will change this to be a static
serial number which will become permanent once the firmware has been updated.
Cannot access COM port
You may get an error message stating "COM (and then a number) could not be opened (Access
is denied)".
This is because an application has control over the COM port that the hub is connected to, and
no subsequent application can access the hub. To resolve this, you will need to close any
applications that control the COM port before opening another.

7.6. No GUI

If you are using a headless system with no GUI, then and you require to enable logging for
support issues, you can use the following command to create the logging cfg file manually:
echo *=DEBUG>/etc/opt/cambrionix/cambrionix.log.cfg
Then after re-producing the problem, you can zip the logs from the folder
/var/log/cambrionix
You may delete the file below when you are finished with it.
/etc/opt/cambrionix/cambrionix.log.cfg
SS15 Page 30 of 36