Connecting To The Mains; Connecting To Host; Registration; Help And Support - CAMBRIONIX SS15 User Manual

EU Power cable
AUS Power cable
IND Power cable

4.3. Connecting to the mains

Connect the Power Supply Unit (PSU) to the hub using the 4-pin DIN plug. Connect the power
cable to the PSU. Making sure you adhere to local safety regulations, connect the power cable
to the 100 – 250 VAC mains power outlet and switch the hub on using the small power switch
located adjacent to the power input connector on the hub. When the device is switched on, a
red LED will be illuminated. The hub is now ready to charge attached devices.
Periodic inspections should be made to power supply cables and any USB cables for any signs of
damage. If any damage is found, replace the damaged cord before further use.

4.4. Connecting to Host

Once the power is connected, connect the SS15 to your host system using a USB 3.2 Type-A
cable. Using an incorrect host cable may result in the hub and all subsequent ports not being
recognised by your host.
Please note that USB specifications require a minimum 100 mA charge current to be delivered
during data transfer. As indicated in above, if the attached device has a BC1.2 compliant CDP
port, the device can draw up to 2.1A while transferring data.

4.5. Registration

You may register your product at

4.6. Help and Support

FAQs and help can be found on the Help page here
www.cambrionix.com/help_pages/help.
l
You can raise a support ticket for more in depth support here
https://cambrionix.atlassian.net/servicedesk/customer/portals
l
You can also download any of our manuals and keep up to date at the link here
www.cambrionix.com/product-user-manuals
l
SS15
200329
200337
200341
www.cambrionix.com/product-registration
Page 9 of 36