Liveviewer - CAMBRIONIX SS15 User Manual

after this command you will need to enter the file name that has just been downloaded from
our website.

5.5.2 LiveViewer

LiveViewer is an application downloaded from www.cambrionix.com/products/liveviewer.
Once downloaded and installed on the host computer, LiveViewer allows you to switch the
ports on and off, set the port to charge only, or sync mode. LiveViewer's home page shows the
following information about all the ports:
• Status (Attached/disconnected)
• Mode (Charge/Sync/Off)
• Profile (Charging profile)
• Duration (How long the device has been attached)
• End time (Time the battery reaches a threshold (full) level)
• Current (Quick charge current in mA)
• Energy (Present energy rate)
Tick boxes adjacent to each port symbol allow that port mode to be changed. When the port is
in Sync mode, only instantaneous current can be monitored through LiveViewer. When the port
is in Charge mode, the charge profile, current, energy rate, charge duration and end time are
displayed. In addition to individual port information and control, LiveViewer shows the hub rail
voltages, time since switched on, total current and power, and temperature. Further details on
LiveViewer are available on our website.
NVRAM settings
Within your hub, there are some specific controllable settings called "none volatile
RAM settings", which are referred to as NVRAM settings. These control a variety of different
settings on your SS15.
You can navigate to the NVRAM settings by opening LiveViewer and selecting the hub you want
to connect to. Once you have chosen the connected hub, navigate to the below icon on the top
right of the screen from LiveViewer and click on advanced.
SS15 Page 18 of 36