Change The Pin Code; Remote Access - Philips CD680 User Manual

Set the ring delay
You can set the number of times the phone
rings before the answering machine picks up
the call.
1
Select [Menu] >
press [OK] to confirm.
2
Select a new setting, then press [OK] to
confirm.
» The setting is saved.
Note
•
Ensure that the answering machine is switched
on before this feature can be applied.
Tip
•
When you access the answering machine
remotely, you are recommended to set the
ring delay to[Toll saver] mode. This is a cost
effective way to manage your messages. When
there are new messages, the answering machine
picks up the call after 3 rings; When there is no
messages, it picks up the call after 5 rings.

Remote access

You can operate your answering machine
when you are away from home. Simply make
a call to your phone with a touch tone phone
and enter your 4-digit PIN code.
Note
•
The remote access PIN code is the same as your
system PIN. The preset PIN is 0000.
EN
40
> [Ring delay], then

Change the PIN code

1
Select [Menu] >
> [Change PIN], then press [OK] to
confirm.
2
Enter the old PIN, then press [OK] to
confirm.
3
Enter the new PIN code, then press [OK]
to confirm.
4
Enter the new PIN code again, then press
[OK] to confirm.
» The setting is saved.
Activate/deactivate the remote access
You can allow or block remote access to the
answering machine.
1
Select [Menu] >
then press [OK] to confirm.
2
Select [Activate]/[Deactivate], then press
[OK] to confirm.
» The setting is saved.
> [Remote access]
> [Remote access],