NEC Express5800 User Manual page 65

Peripheral Configuration
Select "Peripheral Configuration" on the Advanced menu to display the following screen.
See the table below for the items.
IMPORTANT:
requests or the base I/O addresses. If an assigned value is already used
by another resource, it appears in yellow. Any yellow value must be re-
assigned.
Option
Serial Port B
Base I/O Address
Interrupt
Make sure to avoid any conflict in the interrupt
Parameter Description
Disabled Specify whether serial port B is
enabled or disabled.
[Enabled]
3F8h Specify the base I/O address for serial
port B.
[2F8h]
3E8h
2E8h
[IRQ 3] Specify the interrupt for a serial port B.
IRQ 4
Configuring Your Server 4-15
Your Setting
[ ]: Factory-set