Table of Contents
Advertisement
26
INSTALLATION MENU
Clock Setup
Clock Source
- You can select 'Off' , 'Pro:Centric' , 'TV' , 'NTP' , 'Admin' by pressing
- NTP : Clock is synchronized using Network Time Protocol. It's only enabled when network cable is connected.
- Admin : It's automatically set to Admin when clock is updated by commercial protocols like TVLink-HCEC, TVLink-Interactive, or HCAP API.
- Off : Clock is synchronized using any available clock source.
- Pro:Centric : Clock is synchronized using Pro:Centric server.
- TV : Clock is synchronized using particular TV program.
y Input (Depending on model)
- You can select 'Input' according to 'Clock Source' .
- You can select 'RF' or 'IP' when Clock Source is 'Pro:Centric' .
- You can select TV source when Clock Source is 'TV' .
- Input is set to 'None' , 'HCAP' , 'Protocol' , 'HTNG' automatically when Clock Source is 'Admin' .
y Program/Frequency (Depending on model)
- Sets the Frequency to get the time information when Clock Source is 'Pro:Centric' .
- You can select Program when Clock Source is 'TV'
y Timezone(City) /Timezone(Custom) /Timezone(Offset) (Depending on model)
- In the case when there is difference between the time information received from the Teletext and the time of the current area, it can be set up
to correct this. The initial value is 0, and it can be changed in the range of -12Hrs ~ +14Hrs. ( Timezone(Offset) range is -12Hrs ~ +12Hrs )
Password Change
- To ensure more security, Password can be changed by installers' own design.
button to select the CHANGE and then press the OK button.
1
Use the
2
Enter four digit password.
3
Input the password again for confirmation.
PreLoaded App
1
If you want to use a particular app, you can choose from the menu. you can setting each apps activation.
2
You can check or uncheck by pressing 'OK' button.
Lock Mode
- If 'Lock Mode' is 'Yes' , the following features will be unavailable.
*
USB
- If it is set to 'Enable' , USB devices do not work in relative features.(Exclude S/W update).
*
Factory Reset
- If it is set to 'Enable' , User Menu -> General -> 'Reset to Initial Settings' is disabled.
button.
Advertisement
Table of Contents
