Table of Contents
Advertisement
1
6
Male connector on box, viewed
towards connector.
DTV Channel Update
- It is a mode to set whether to update DTV Channel automatically or not.
When DTV Channel Update is set to 'Auto' , the function to update TV's Channel map according to dtv Channel's stream information.
DTV Channel Update is set to 'Manual' , the function to keep TV's Channel map even though DTV Channel's information is changed.
On Timer Operation
- It is a mode to select 'On Timer Operation' working one time or repeatedly.
'ONE' : 'On Time' in the user menu operates only one time when the 'On Time' menu is set to 'ON' .
'Repeat' : 'On Time' operates repeatedly when the 'On Time' menu is set to 'ON' .
Radio Name Display
- Instead of "Audio Only", the name of a radio channel is displayed on the screen when a radio broadcast is playing.
- Set to On(Work) or Off(Do Not Work).
- If the setting is "On", the name of a radio channel is displayed for the radio channel.
- If the setting is "Off", the text "Audio Only" is displayed for the radio channel.
15Min Auto Off
- When '15Min Auto Off' is set to 'Enable' , TV will turn off if there is no signal in 15Min.
Auto Sensing
- If 'Auto Sensing' is set to 'On' , the input is automatically switched when the input signal that you set to "ON' is received.
- If 'Auto Sensing' is set to 'Disable' , the input is not switched when the input signal is received.
*
SIMPLINK and Auto Sensing cannot work simultaneously. If SIMPLINK is set to On, Auto Sensing is automatically set to Disable.
*
If the signal is removed while Auto Sensing (automatic input switch) is enabled, the input returns to the previous setting.
If the several input are connected by enabling Auto Sensing and the automatic input returns to the previous setting.
If the several inputs are connected by enabling Auto Sensing and the automatic input switch is performed several times, the input returns to
the previous setting only for the last input and does not repeat the operation for the rest.
*
For the AV input connected using the euro scart cable, Auto Sensing does not word for the TV input because the Auto AV function is enabled.
(For other inputs, Auto Sensing works normally.)
No.
Signal
5
1
VCC
2
RX RS232
3
TX RS232
4
IR from TV
5
GND
9
6, 8
Not connected
7
2 A
9
1.5 A
(Depending on model)
INSTALLATION MENU
Signal requirements
Standard RS232 specification
Standard RS232 specification
Power ground
+5VDC 10%, max 100mV ripple
+12VDC 10%, max 100mV ripple
23
Advertisement
Table of Contents
