Table of Contents
Advertisement
05/08 Rev. AB
Care & Maintenance
Error Messages
Calling
Technical
Support
Frequency of
Care
OPERATOR'S HANDBOOK
9844/9854
Regular maintenance is required to make sure the printer is always operating
safely.
Safety
WARNING!
Maintenance and cleaning may result in hazardous situations. Accidents can
occur if safety instructions are not followed!
Turn off the printer and disconnect the power supply before any cleaning or
maintenance work!
Do not spill liquid into the printer!
Do not spray any cleaner directly on the printer! Moisten a cloth with the
recommended cleaning agent to clean the printer!
Troubleshooting
When an error occurs, read the messages first and refer to the
documentation for more information.
If you need to call Service, have your printer's model number and serial
number ready.
Call Service to order spare parts.
Note on Cleaning
Frequent maintenance and cleaning is required to make sure the printer is
operating properly. The rate and frequency at which you print determine how
often you must clean the printer.
Frequently check the printhead and feed rollers for paper or adhesive
buildup.
WARNING! - Do not use any cleaning agent that could damage or destroy
the resin surface, labelling, display, nameplates, electrical components, etc.
WARNING! - Do not use any cleaning agents that are abrasive or
damaging to plastics. Avoid acid or alkaline solutions.
Care & Maintenance
3-2
Hide quick links:
Advertisement
Table of Contents
