Online Operation - Avery Dennison Monarch 9844 Operator's Handbook Manual

05/08 Rev. AB
•
•
•
•
•
•
•
OPERATOR'S HANDBOOK
9844/9854
Access the parameter menu:
OFFLINE x JOBS
Feed material until the next punch (die cut) is reached or when the button is
held down:
OFFLINE x JOBS
Setting the label length automatically:
OFFLINE x JOBS
After pressing the two buttons, the printer feeds the label material, until two
punches have passed the label sensor. The measured label length is
displayed and saved into parameter PRINT PARAMETERS > Material length. Next,
the parameter PRINT PARAMETERS > Material type is set to "punched."
OFFLINE x JOBS
198.5 mm
The label length measured by this function is from label end to label end.
If material with very large punches is used, this measurement does not work
properly. In this case, measure and set the label length manually (label length
+ punch length).

Online Operation

Press the buttons indicated in black to perform the listed functions.
Switching to offline mode:
ONLINE x JOBS
Setting the print contrast: Press Feed to increase and Cut to decrease the
print contrast.
ONLINE x JOBS
Interrupting the print job: The printer finishes printing the current label.
ONLINE X JOBS
Restcount XXX
a) The message "Stopped
Switching to offline mode while the print job is stopped:
ONLINE X JOBS
Stopped XXX
Prog
Feed
Feed Prog
Displays the measured label length.
Online
Prog
Prog
xxx" alternates with "Press Feed."
Online
Getting Started
PRINT INFO
OFFLINE x JOBS
feeding...
OFFLINE x JOBS
Manual Calibrate
OFFLINE x JOBS
Print contrast
xxx%
ONLINE X JOBS
a
Stopped XXX
OFFLINE x JOBS
1-17