Date Printing - Casio Exilim EX-Z110 User Manual

PRINTING IMAGES
12 .
On the camera's monitor screen, use [ ] and
[ ] to select "Print", and then press [SET].
• This starts printing and displays the message
"Busy.... Please wait..." on the monitor screen. The
message will disappear after a short while, even
though printing is still being performed. Pressing any
of the camera's buttons while printing is in progress
will cause the message to reappear.
• The print menu will appear when printing is
complete.
• If you selected "1 Image" in step 11, you can select
another image for printing and then repeat this step
to print.
13 .
After printing is complete, turn off the camera
and then disconnect the USB cable from the
camera.

Date Printing

Any one of the procedures described below can be used to
include the recording date in image prints. Correct date
printing requires that the current date be set on the camera
before the image is recorded.
• Specifying date printing with DPOF settings (page 184)
– Some printers may have settings that disable time
stamp and/or DPOF printing. See the user
documentation that comes with your printer for details
about how to enable these features.
– Note that some professional print services do not
support DPOF printing. Check with your service before
ordering prints.
• Specifying date printing with the Photohands software
that comes with the camera
– See page 23 of the Photohands User's Guide for
details. The Photohands User's Guide is provided as a
PDF file on the CD-ROM that comes bundled with your
camera.
• Specifying date printing when having printing done by a
print service
– Some print services do not support date printing. Check
with your service for more information.
190