OTHER RECORDING FUNCTIONS
1.
In a REC mode, align
the mode dial with
" ".
• This enters the Voice
Recording mode and
causes "
" to appear
on the monitor screen.
2.
Press the shutter button to start voice
recording.
• The remaining recording time value counts down on
the monitor screen and the green operation lamp
flashes as recording is performed.
• Pressing [DISP] during voice recording turns off the
monitor screen.
• You can insert index marks while recording by
pressing [SET]. See page 153 for information about
jumping to an index mark during playback.
Recording time
Remaining recording time
114
3.
Recording stops when you press the shutter
button, when memory becomes full, or when
the camera's batteries go dead.