Casio Exilim EX-Z110 User Manual page 125

OTHER RECORDING FUNCTIONS
Spot
Spot metering takes readings at a very
small area. Use this metering method
when you want exposure to be set
according to the brightness of a
particular subject, without it being
affected by surrounding conditions.
IMPORTANT!
• When "Multi" is selected as the metering mode,
certain procedures cause the metering mode setting
to change automatically as described below.
• Changing the exposure compensation setting (page
87) to a value other than 0.0 changes the metering
mode setting to "Center Weighted." The metering
mode changes back to "Multi" when you return the
exposure compensation setting to 0.0.
NOTE
• You can use the key customization feature (page
119) to configure the [ ] and [ ] buttons so they
select the metering method.
125