Chapter 1
USB Management
Function Descriptions
Restoring the Telephone Book
(1) Connect the WirelessIP 3000 and the PC using the special USB cable.
(2) Start up USBManager.exe. If the operating buttons are not functioning, please install the driver.
(3) Select the Restore button.
(4) Specify the file to restore and select the Open button. (Figure 6)
(5) Confirm that the telephone book data has been successfully restored. (Figure 7)
(6) Finally select reboot to reboot WirelessIP 3000.
The operating buttons cannot be used when rebooting.
Do not remove the USB cable or turn off the power while operating, as this may cause the device to malfunction.
Figure 6
Figure 7
- 1-7 -