Chapter 1
USB Management
Function Descriptions
Backing Up the Telephone Book
(1) Connect the WirelessIP 3000 and the PC using the special USB cable.
(2) Start up USBManager.exe. If the operating buttons are not functioning, please install the driver.
(3) Select the Backup button.
(4) Specify the storage location of the telephone book data, enter a filename for the telephone book data and press the Save
button.
(Figure 4)
(5) Confirm that the telephone book data has been successfully backed up. (Figure 5)
Do not remove the USB cable or turn off the power while operating, as this may cause the device to malfunction.
Figure 4
Figure 5
- 1-5 -