Table of Contents
Advertisement
Chapter 1
USB Management
Function Descriptions
Root Certificate Upload Method
(1) Connect the WirelessIP 3000 and the PC using the special USB cable.
(2) Start up USBManager.exe. If the operating buttons are not functioning, please install the driver.
(3) Press Alt + S to display the Admin menu.
(4) Select the Root Certification button.
(5) Specify the root certificate file to upload and select the Open button. (Figure 10)
(6) Confirm that the root certificate upload has been successfully completed. (Figure 11)
(7) Finally select Reboot and reboot WirelessIP 3000.
The operating buttons cannot be used when rebooting.
Do not remove the USB cable or turn off the power while operating, as this may cause the device to malfunction.
Figure 10
Figure 11
- 1-9 -
Advertisement
Table of Contents
