Page 1
Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per MSI Summit MS321UP o cerca il tuo prodotto tra le migliori offerte di Monitor Summit Series LCD Monitor Summit MS321UP (3DA9) User Guide...
Contents Getting Started ......................3 Package Contents ....................3 Installing the Monitor Stand ................... 4 Installing the Monitor Hood (Optional) ..............6 Adjusting the Monitor ..................... 7 Monitor Overview ....................8 Connecting the Monitor to PC ................11 OSD Setup ........................12 Navi Key ........................
Getting Started This chapter provides you with the information on hardware setup procedures. While connecting devices, be careful in holding the devices and use a grounded wrist strap to avoid static electricity. Package Contents Monitor Summit MS321UP Quick Start Guide Documentation Registration Card Warranty Card (Optional)
Installing the Monitor Stand ⚠ Important ∙ Place the monitor on a soft, protected surface to avoid scratching the display panel. Avoid pressing the monitor when installing the monitor stand. ∙ Do not use any sharp objects on the panel. ∙...
Page 5
1. Leave the monitor in its protective foam packaging. Align and place the tabs on the top edge of the stand bracket into the slots on the back of the monitor. 2. Tighten the stand bracket with screws. 3. Connect the base to the stand and tighten the base screw to secure the base. 4.
Installing the Monitor Hood (Optional) 1. Unfold and align the hood to the monitor. 2. The magnetic hood will be attached to monitor automatically. Getting Started...
Adjusting the Monitor This monitor is designed to maximize your viewing comfort with its adjustment capabilities. ⚠ Important Avoid touching the display panel when adjusting the monitor. 100mm Getting Started...
Page 9
Macro Key To activate MSI Productivity Intelligence OSD. Power Button Light Sensor Microphone Navi Key Kensington Lock Power Jack HDMI Port DisplayPort USB Type-C Port This port supports DisplayPort Alternate (DP Alt) Mode and up to 5V/3A power delivery. USB 3.2 Gen 1 Type B Upstream Port For USB Upstream Cable.
Page 10
Card Reader Microphone Jack Headphone Jack Cord Sleeve ⚠ Important All USB ports do not support recharging function under power saving modes. Getting Started...
Connecting the Monitor to PC 1. Turn off your computer. 2. Connect the video cable from the monitor to your computer. 3. Connect the power cord to the monitor power jack. (Figure A) 4. Plug the power cord into the electrical outlet. (Figure B) 5.
OSD Setup This chapter provides you with essential information on OSD Setup. ⚠ Important All information is subject to change without prior notice. Navi Key The monitor comes with a Navi Key, a multi-directional control that helps navigate the On-Screen Display (OSD) menu. Up/Down/Left/Right: ∙...
OSD Menus ⚠ Important The following settings will be grayed out when HDR signals are received: Low Blue Light ∙ Brightness ∙ Contrast ∙ Color Temperature ∙ Auto Brightness Control ∙ Ambient RGB Light ∙ PIP/PBP ∙ Gray Level ∙ ∙...
P.I. (Productivity Intelligence) 1st Level Menu 2nd/3rd Level Menu Description Auto ∙ Through the internal Light Sensor Brightness and AI (Artificial Intelligence) Auto Control algorithm, this function detects the ambient light and Customize 0-100 automatically sets the monitor to optimal brightness for users. ∙...
Professional 1st Level Menu 2nd/3rd Level Menu Description Mode User ∙ All items can be adjusted by users. ∙ Use Up or Down Button to select and sRGB preview mode effects. Adobe RGB ∙ Press the Middle Button to confirm and apply your mode type.
Page 16
1st Level Menu 2nd/3rd Level Menu Description Alarm Clock Location Left Top ∙ Users can adjust Alarm Clock in any mode. Right Top ∙ After setting the time, press the Middle Button to activate the timer. Left Bottom ∙ Users have to manually restore their preset Alarm Clock after any AC Right power loss and reconnection.
1st Level Menu 2nd/3rd Level Menu Description Zoom In Location Center ∙ The center point will zoom in when this setting is enabled. Users can Up-Left select their Location for Zoom In. ∙ Design Assistance and Zoom In can Up-Right be enabled at the same time.
Page 18
1st Level Menu 2nd/3rd Level Menu Description Low Blue Light ∙ Low Blue Light protects your eyes against blue light. When enabled, Low Blue Light adjusts the screen color temperature to a more yellow glow. ∙ When Mode is set to Anti-Blue, it is mandatory to enable Low Blue Light.
1st Level Menu 2nd/3rd Level Menu Description Saturation R (0-100) ∙ Default is 50. G (0-100) B (0-100) C (0-100) M (0-100) Y (0-100) R (0-100) ∙ Default is 50. G (0-100) B (0-100) C (0-100) M (0-100) Y (0-100) Input Source 1st Level Menu 2nd Level Menu...
PIP/PBP 1st Level Menu 2nd/3rd Level Menu Description ∙ Enabling PIP (Picture in Picture) or PBP (Picture by Picture) will Source HDMI1 affect FreeSync, Response Time, HDMI2 Screen Size 1:1 and Zoom In. ∙ Display Switch allows users to switch between primary and Type C secondary input sources.
Navi Key 1st Level Menu 2nd Level Menu Description Up / Down / Left ∙ Up Button default is Mode. / Right ∙ Down Button default is Design Assistance. Brightness ∙ Left Button default is KVM. Mode ∙ Right Button default is Input Source. Design Assistance ∙...
Page 22
1st Level Menu 2nd Level Menu Description Power Button ∙ When set to OFF, users can press the power button to turn off the monitor. Standby ∙ When set to Standby, users can press the power button to turn off the panel and backlight.
Specifications Monitor Summit MS321UP Size 32 inch Panel Type Resolution 3840 x 2160 @60Hz Aspect Ratio 16:9 Brightness (nits) Contrast Ratio 1000:1 Refresh Rate 60 Hz Response Time GTG 4ms ∙ HDMI Port x2 ∙ DisplayPort x1 ∙ USB Type-C (DP Alt Mode) x1 (Up to 5V/3A power delivery) ∙...
Page 24
Monitor Summit MS321UP Adjustment (Height) 0 ~ 100 mm Kensington Lock VESA Mounting Plate Type: 100 x 100 mm ∙ Screw Type: M4 x 10 mm • Thread Diameter: 4 mm • Thread Pitch: 0.7 mm • Thread Length: 10 mm Dimension (W x H x D) 727.1 x 460.78 x 235 mm Weight...
Troubleshooting The power LED is off. • Press the monitor power button again. • Check if the monitor power cable is properly connected. No image. • Check if the computer graphics card is properly installed. • Check if the computer and monitor are connected to electrical outlets and are turned on.
∙ Place the power cord in a way that people are unlikely to step on it. Do not place anything on the power cord. ∙ If this device comes with an adapter, use only the MSI provided AC adapter approved for use with this device.
Page 28
California, USA: The button cell battery may contain perchlorate material and requires special handling when recycled or disposed of in California. For further information please visit: https://dtsc.ca.gov/perchlorate/ Environment ∙ To reduce the possibility of heat-related injuries or of overheating the device, do not place the device on a soft, unsteady surface or obstruct its air ventilators.
TÜV Rheinland Certification TÜV Rheinland Low Blue Light Certification Blue light has been shown to cause eye fatigue and discomfort. MSI now offers monitors with TÜV Rheinland Low Blue Light certification to ensure users’ eye comfort and well-being. Please follow the instructions below to reduce the symptoms from extended exposure to the screen and blue light.
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. MSI Computer Corp. 901 Canada Court, City of Industry, CA 91748, USA (626) 913-0828 www.msi.com...
Page 31
Vietnam RoHS As from December 1, 2012, all products manufactured by MSI comply with Circular 30/2011/TT-BCT temporarily regulating the permitted limits for a number of hazardous substances in electronic and electric products.