Table of Contents
Advertisement
To check programmes
[RAM] [DVD-R]
Press [PROG/CHECK] (13).
The Timer Programme List screen appears.
TIMER
RECORDING
No. Name
Date
Start
Stop
01
AV1
15/ 7 TUE
1:19
1:22
W
15/ 7 TUE
1:20
02
AV1
2:20
A
F
AV1
03
23/ 7 WED
8:00
9:00
04
AV1
23/ 7 WED
9:00
10:00
X
05
AV1
23/ 7 WED
10:00
11:00
New Timer Programme
SELECT
CANCEL
ENTER
RETURN
Icon explanations (A)
¥
This programme is currently recording.
W
The programme is overlap with another programme.
F
The disc was full or the maximum number of programmes or
scenes was reached so the programme failed to record.
The programme was copy-guarded so the programme failed
to record.
TV system of the programme is different from the setting in
SETUP, so the programme failed to record.
X
The programme did not complete recording because the
disc is dirty or some other reason.
Disc space (B)
OK:
Displayed if the recording can fit in the remaining
space on the disc.
# (Date):
For recordings made daily or weekly, the display
will show until when recordings can be made
based on the time remaining on the disc.
!:
Displayed if the disc is not inserted in the unit or is
write-protected (pages 28, 61) or there is not
enough memory capacity left on the disc.
ªTo exit from the Timer Programme List screen
Press [PROG/CHECK] (13) or [RETURN] (28).
For your reference
≥Programmes that failed to record are deleted from the list at 4
a.m. the day after tomorrow.
Remain
1:58 SP
1:19:00 15.7 TUE
Disc
Mode
space
SP
OK
SP
OK
B
SP
OK
SP
OK
SP
OK
Starting and canceling programmes
[RAM] [DVD-R]
ªTo put the unit on recording standby
, TIMER] (14).
Press [
The unit turns off and "
Note
≥The unit cannot go to timer recording standby if the disc is
protected (pages 28, 61) or full ("
carefully.
ªTo release the unit from recording standby
If you want to record something else before the programme start
time, for example:
, TIMER] (14).
Press [
The unit turns on and "
≥Be sure to press [
, TIMER] (14) before the programme start
time to put the unit on recording standby. The programme only
works if "
" is on.
ªTo stop recording while a programme is working
, TIMER] (14).
Press [
To clear a timer recording programme
[RAM] [DVD-R]
Press [CANCEL] (5) or [ERASE] (32) while the
programme's Timer Programme Correction screen is
being shown.
(Alternatively, use [3, 4] (10) to select the programme
in the Timer Programme List screen and press
[CANCEL] (5) or [ERASE] (32).)
≥You can not delete programmes that are currently recording.
25
Timer recording (continued)
" lights on the unit's display.
" flashes). Check the disc
" goes out.
Advertisement
Table of Contents
