Panasonic DVD-S29 Operating Instructions Manual page 21

≥ Restore the zoom ratio to a1.00. (12)
Menu not displayed
≥ Set "Subtitle Position" in Display Menu to "0". (17)
correctly.
≥ Set "4:3 Aspect" in Display Menu to "Normal". (17)
≥ Turn off TV's zoom function.
Auto zoom
≥ Use the other preset aspect ratios or manual adjustment.
function does not
(12)
work well.
≥ Zoom function may not work well, especially in dark scenes
and may not work depending on the type of disc.
Progressive video
≥ This problem is caused by the editing method or material
There is ghosting
used on DVD-Video, but should be corrected if you use
when progressive
interlace output. Change "Video Output Mode" in Picture
output is on.
Menu to "xxxi" (interlace). (17)
≥ If the unit is connected to the television through VIDEO OUT
Pictures not in
progressive output. or S VIDEO OUT
Sound incorrect
≥ Select "Off" in "Advanced Surround". (11)
Sound distorted.
≥ Select "On" in "Attenuator" in Audio Menu if it causes
distortion with AUDIO OUT connections. (17)
≥ If you have connected a digital amplifier which does not
Piercing noise
comes from the include decoder, be sure to select "PCM" in "Dolby Digital",
speakers. "DTS Digital Surround" or "MPEG" in "Audio" tab. (19)
≥ None of the audio effects work when the unit is outputting
Effects do not
work. bitstream signals from the COAXIAL terminal. (7)
≥ Some audio effects do not work or have less effect with
some discs.
≥ Advanced Surround and Sound Enhancement do not work if
you have changed the play speed.
≥ There may be a pause in sound when you change the play speed.
No sound
≥ Audio may not be output due to how files were created. [DivX] (5)
Recording
≥ You cannot record WMA/MP3.
Cannot record to
≥ You cannot record DVDs that have protection preventing
digital recording
digital recording.
equipment.
≥ You cannot record DVDs if the recording equipment cannot
(Incorrect sound
handle signals with a sampling frequency of 48 kHz.
≥ Make the following settings:
recorded.)
– Advanced Surround:
– PCM Digital Output:
– Dolby Digital/DTS Digital Surround/MPEG:
§
, output will be interlace.
Off (11)
Up to 48 kHz (19)
PCM (19)
Unit displays
≥ You inserted a disc the unit cannot play; insert one it can. (4)
"noPLAy"
≥ You inserted a blank disc.
≥ You inserted a disc that has not been finalized. (4)
≥ The disc may be dirty. (4)
"U11"
≥ Trouble may have occurred. The number following "H"
"H∑∑"
depends on the status of the unit. Turn the unit off and then
(∑∑ stands for a
back to ON. Alternatively, turn the unit off, disconnect the AC
number.)
mains lead, and then reconnect it.
≥ If the service numbers fail to clear, note the service number
and contact a qualified service person.
≥ You haven't inserted a disc: Insert one.
"nodISC"
≥ You haven't inserted the disc correctly: Insert it correctly. (8)
Television displays
≥ The operation is prohibited by the unit or disc.
"/"
≥ You are trying to play incompatible group or content. (5)
"Cannot play group xx,
content xx"
"Cannot display group
xx, content xx"
≥ You are trying to play protected group or content. You cannot
"Group xx, content
xx is protected" play it.
≥ Audio has not been recorded, or recorded in a format this unit
"Cannot play audio"
cannot playback. Video playback only is possible. (5)
"No audio"
≥ This disc may be dirty. (4)
"Check the disc"
≥ The player plays DVD-Video marked with labels containing
"This disc may not
be played in your the region number "2" or "ALL". (Cover)
region"
≥ Select "On" in "On-Screen Messages" in "Display" tab. (19)
No on-screen display.
"Authorization Error" ≥ You are trying to play the DivX VOD content that was
purchased with a different registration code. You cannot play
the content on this unit. [DivX] (5)
≥ The DivX VOD content has zero remaining plays. You cannot
"Rented Movie
play it. [DivX] (5)
Expired"
S VIDEO OUT: [The\Middle\East\and\South\Africa\
§
21