Troubleshooting Guide - Panasonic DVD-S29 Operating Instructions Manual

Troubleshooting guide

Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, consult
your dealer for instructions. (Reference pages are shown in parentheses.)
Power
≥ Insert the AC mains lead securely into the household mains
No power.
socket. (7)
≥ When "Auto Power Off" is set to "On", the unit automatically
The unit is
switches to standby after approximately 30 minutes in the
automatically
stop mode. (19)
switched to the
standby mode.
No operation
≥ This unit cannot play discs other than the ones listed in
No response
these operating instructions. (4)
when any buttons
≥ The unit may not be operating properly due to lightning,
pressed.
static electricity or some other external factor. Turn the unit
off and then back to ON. Alternatively, turn the unit off,
disconnect the AC mains lead, and then reconnect it.
≥ Condensation has formed: Wait 1 to 2 hours for it to evaporate.
≥ Check that the batteries are installed correctly. (7)
No response
≥ The batteries are depleted: Replace them with new ones. (7)
when remote
≥ Point the remote control at the remote control sensor and
control buttons
operate. (8)
pressed.
≥ Check the video or audio connection. (6, 7)
No picture or
≥ Check the power or input setting of the connected
sound.
equipment.
≥ Check that the disc has something recorded on it.
≥ While stopped, press and hold [QUICK OSD] and [;] on the
You have
forgotten your unit and then also press and hold [<OPEN/CLOSE] on the
unit until "Initialised" disappears from the television. Turn the
ratings password.
unit off and on again. All settings will return to the default
Reset all the settings
values.
to Factory Preset.
Specific operation impossible or incorrect
≥ Play may take time to begin when an MP3 track has still
It takes time
picture data. Even after the track starts, the correct play time
before play starts.
will not be displayed; however, this is normal. [MP3]
≥This is normal on DivX video. [DivX]
≥ These functions do not work with some DVD-Videos.
The program and
random play functions
do not work. [DVD-V]
≥ Press [∫] twice and then press [1] (PLAY).
Menu doesn't
appear. [VCD] with
playback control
20
≥This unit may not play WMA and MPEG4 that
Play doesn't start.
contains still picture data. [WMA] [MPEG4]
≥If playing DivX VOD content, refer to the
homepage where you purchased the DivX VOD
content. (Example: www.divx.com/vod) [DivX]
≥If a disc contains CD-DA ([CD]) and other formats,
proper playback may not be possible.
≥ Adjust the position. ("Subtitle Position" in Display
Subtitle position is wrong.
Menu) (17)
≥ Display the subtitles. (12)
No subtitles.
≥ The end of an item becomes point B when it is
In A-B Repeat, point B is
reached.
automatically set.
≥ A-B Repeat is canceled when you press
Repeat play is automatically
[QUICK REPLAY].
canceled.
≥ Repeat play may be canceled when you press
[MANUAL SKIP] or [ADVANCED DISC REVIEW].
Picture incorrect
≥ Ensure that the unit is not connected through a video
Picture distorted.
cassette recorder. (6)
≥ Make sure that progressive output has not been selected
when the connected television is not progressive compatible.
Press and hold [CANCEL] until the picture displays correctly.
The settings will return to "xxxi" (interlace).
≥ Change "Source Select" in Picture Menu. [DivX] (17)
≥ Change "TV Aspect" in "Video" tab. (18)
Picture size
≥ Use the television to change the aspect. If your television
doesn't fit the
does not have that function, change "4:3 Aspect" in Display
screen.
Menu. (17)
≥ Change the Zoom setting. (12)
≥ Picture may stop if the DivX files are greater than 2GB. [DivX]
Picture stops.
≥ The unit and television are using different video systems.
The television
Use a multi-system or PAL television.
may display
≥ The system used on the disc doesn't match your television.
incorrectly or
–PAL discs cannot be correctly viewed on an NTSC
colours appear
television.
faded.
–This unit can convert NTSC signals to PAL 60 for viewing
on a PAL television ("NTSC Disc Output" in "Video" tab).
(18)