Turning Power On/Off - Panasonic DMC-FZ1PP Operating Instructions Manual

Turning Power on/off

• When turning on the power in the recording mode, do not put any obstacle in front
of the lens.
• Please be sure to remove the lens cap before you switch on the camera in
recording mode. If not, the message "REMOVE LENS CAP AND PRESS SET
BUTTON" appears on the LCD monitor/Viewfinder. Please remove the lens cap
and press 4/[REVIEW/SET] button 2.
• Do not exert any pressure on the lens when it is extended. To clean the lens,
please turn the camera off to retract the lens.
Preparation
1
2
1,2
OFF ≥ ≥ ON
ª Power indicator
Lighting:
OFF ON
≥ ≥
Blinking:
Set the power switch to [ON].
• The power indicator 1 lights.
Set the power switch to [OFF].
• When turning the power switch to [ON]
• When the Memory Card/battery door is
opened
• When the card is not inserted
• When no space is left on the card
• When the card is protected during
recording
• When you start recording with the lens
cap attached
• When the remaining battery power is
low (blinking slowly)
17