Connecting To An Electrical Outlet - Panasonic DMC-FZ1PP Operating Instructions Manual

Connecting to an Electrical Outlet

1
DC IN
Preparation
If you use an AC adaptor as indicated in 3,
you can use the camera without worrying
about battery discharge.
[Preparation]
• Check that the power switch is set to [OFF]
and the lens is stored.
1
Connect the AC cable.
2
Open the DC IN terminal door 1.
3
3
Connect the DC cable (supplied) to
the camera.
• The camera becomes warm during use.
However, this is not a malfunction.
• Disconnect the AC adaptor and DC cable
when the camera is not in use.
• The battery cannot be charged in the
2 camera with the AC adaptor connected.
• Use the supplied DC cable.
14