Procedure
The basic steps are shown below.
1. Entering the programming mode
PROGRAM
OR
PAUSE
Press PROGRAM
or PAUSE.
2. Programming
programme no.
Enter programme
Press NEXT.
number (3 digits).
• To delete or change an entry, press CLEAR (TRANSFER).
• To confirm your entry after storing data:
– The STORE button light: Lights red.
– Confirmation Tone: One beep: Your entry is accepted.
Three beeps: Your entry is rejected.
• To exit the programming mode at any time, lift the handset.
3. Exiting the mode
PROGRAM
OR
PAUSE
Press PROGRAM
or PAUSE.
user password
Dial
.
Enter user password.
SKP +
OR
Press SKP+.
Press SKP-.
your entry
NEXT
Enter your entry
NEXT
Press NEXT.
Press SELECT.
SKP –
To continue programming
To end
STORE
Press STORE.
To continue entering selections
PREV
OR
Press PREV.
SELECT
To go to the next/previous programme or entry.
To enter the desired programme or entry.
Customising Your Phone & System
END
Press END.
4-11