Ambient Conditions Of Storage - Delta NC200 Manual

Accessories (NC200A-LI-A_; NC200P-LI-A_)
Accessory
One 3-pin connector
One terminal resistor
Eight sets of M3 screws and
nuts
One female 15-pin connector
with one fitting
One male and one female
15-pin connectors
with two sets of fitting
One 2-pin connector
One 8-pin connector
One 5-pin connector
One 2-pin connector
One 6-pin connector
One 6-pin connector
Note:
1. On NC200A-LI-A, this connector is for the I/O of the secondary panel.
2. On NC200P-LI-A, this connector is for the cycle start, feed hold, and emergency stop button and I/O of the
secondary panel.

Ambient Conditions of Storage

Before installation, this product has to be kept in the shipping carton. If the product is
temporarily not in use, please comply with the following instructions in order to retain the
warranty coverage as well as for future maintenance:
 The product should be stored in dry and dust-free place. It is preferable to pack the
product properly and store it on shelf or table.
Store the product within an ambient temperature range of -20

140°F).
 Store the product within a relative humidity range of 10% to 95%, non-condensing.
 Avoid storing the product in the environment containing corrosive gas and liquid.
 Avoid storing the product in the environment with vibration that is out of the range
stipulated in the specification.
NC200A-LI-A_ NC200P-LI-A_
●
●
●
●
1
●*
●
●
●
●
●
English-4
●
For 24 V
●
For DMCNET
● For securing to the machine
● For SPINDLE
For MPG and SPINDLE
For the 24 V
2
●*
secondary panel
For the X output contact of the
●
secondary panel
For the X output contact of the
●
secondary panel
For IES of the secondary panel
IES: Internal emergency stop
For HSI
●
HSI: For HSI (high-speed G31)
and external emergency stop
For REMOTE I/O
●
REMOTE I/O: High-speed
serial I/O
Purpose
power
DC
power to the
DC
to 60°C ( -4°F to
℃