Advertisement
Before Reading These Instructions
Panasonic welcomes you to our constantly growing family of electronic products owners.
We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefully selected components,
and assembled by people who are proud of the reputation their work has built for our company. We know this product will bring you many
hours of enjoyment, and after you discover the quality, value and reliability we have built into it, you too will be proud to be a member of our
family.
Accessories
Operating Instructions
Installation kit (ZZBISC1101U-J)
Mounting Collar *
(English: YFM284C610CA)
(FX0214C384ZB)
Lock Cancel Plate
(
: YFM284C612CA)
(FX0214C385ZA)
Trim Plate *
Q'ty: 2
(Deutsch: YFM284C502CA)
(YFC054C079YA)
Q'ty: 1 set
Mounting Bolt
(YEJV014C002N)
Installation Instructions
Power Connector
Q'ty: 1
(YFM294C073CA)
(YGAJ021012)
Rubber Bushing
Q'ty: 1
(YFS014C095ZA)
Q'ty: 1
Notes:
Request for use of the Removable Face Plate Case
¡
The number in parentheses underneath each accessory part
¡
To avoid trouble and ensure safety, use the optional
name is the part number for maintenance and service.
Removable Face Plate Case (YFC054C061ZB)
¡
Accessories and their part numbers are subject to modifica-
tion without prior notice due to improvements.
¡
Mounting Collar and Trim Plate are mounted on the main unit
at shipment. *
Disc Player
Disc slot
[TRACK s] [TRACK d]
takes a disc in with the label-side facing up.
skip to the previous/next track in
Note: The power will be turned on automatically
the player mode.
when a disc is loaded.
Hold down either of them for fast
reverse/fast forward.
Printed side up
(y / 5) (Pause/Play)
toggles pause/play in
the player source.
BAND
CQ-C1105W
DISP
APM
[SRC] (Source)
selects a source.
1
6
2
3
4
5
SRC/PWR
(SCAN)
[REP] (Repeat)
Direct selection buttons [1] – [6]
toggles on/off the scan play. (Hold it
toggles on/off the repeat play.
down for more than 2 seconds.)
(7) – (12) (Hold down one of them for
(RANDOM)
more than 2 seconds.)
toggles on/off the random play. (Hold
select a track directly.
it down for more than 2 seconds.)
¡
If you insert an 8 cm disc and cannot eject it, turn the ignition
Caution
key to the ACC OFF position once and turn the key to the ACC
ON position again, then press [u] (Eject).
¡
Do not insert a disc when the
indicator
¡
This unit does not support MP3 and WMA disc
lights.
playback.
¡
Refer to the section of "Notes on Discs".
¡
This unit does not support CD text display.
¡
This unit does not support 8 cm discs.
¡
Do not insert foreign matter into the disc slot.
1
Pause
Press [SRC] to select the Disc Player
source.
Press [BAND] (y / 5).
2
Select a desired portion.
Press again to cancel.
Track selection
Direct track selection
Press [TRACK s] / [TRACK d].
Press a track number button from [1] – [6].
¡ The corresponding track (1–6) starts playing.
Note: To perform fast forward/reverse, hold down
Hold down a track number button from [1]
either of them.
– [6] ((7) – (12)) for more than 2 seconds.
¡ The corresponding track (7–12) starts playing.
General
[VOL] (Volume) (Turn)
adjusts the volume.
[MUTE]
MUTE
toggles mute on/off.
CQ-C1105W
SRC/PWR
Light when mute is ON.
[SQ] (Sound Quality)
[SRC] (Source)
selects a sound type (SQ).
selects a source.
(PWR) (Power)
toggles power on/off.
Power On/Off
SQ (Sound Quality)
SQ is a function that can call up various sound types at
Turn your car's ignition switch to the ACC or ON position.
the touch of button in accordance with your listening
Power on: Press [SRC] (PWR).
music type.
Q'ty: 1
Power off: Hold down [SRC] (PWR) for more
Press [SQ] to select the sound type as follows:
than 1 second.
Q'ty: 1
Source Selection
Press [SRC] to change the source.
Q'ty: 1
Radio
Disc Player
Volume Adjustment
(Setting Range: 0 to 40, Default: 18)
Turn [VOL].
Mute
ON: Press [MUTE].
(
lights.)
OFF: Press [MUTE] again.
Note: Settings of SQ, bass and treble are influenced one
another. If such an influence causes distortion to the
audio signal, readjust bass/treble or volume.
Random indicator
Display change
Play time
Track number
Press [DISP] to change the display.
Player source display (Default)
[u] (Eject)
lights when a disc is in the player.
ejects the disc.
Repeat indicator
[DISP] (Display)
switches the infor-
mation on the dis-
play.
Random play
Scan play
All the available tracks are played in a random sequence.
The first 10 seconds of each track is played in sequence.
Hold down [REP] (RANDOM) for more than
Hold down [SQ] (SCAN) for more than 2
2 seconds.
seconds.
Hold down again to cancel.
Repeat play
Hold down again to cancel.
The current track is repeated.
Press [REP].
Press again to cancel.
Radio (FM/AM)
[BAND]
[D•M] (Direct Memory)
tunes into the station memorized in D•M. (Hold
selects a band in the radio source.
Auto Preset Memory)
it down for more than 2 seconds to memorize
(APM) (
the current station.)
executes APM in the radio source. (Hold it
down for more than 2 seconds.)
BAND
APM
[SRC] (Source)
selects a source.
1
2
Preset buttons [1] – [6]
selects a preset station in the radio
source, and presets the current
station. (Hold it down for more than
2 seconds.)
1
Press [SRC] to select the radio source.
(FLAT) flat frequency response:
does not emphasize any part. (Default)
2
Press [BAND] to select a band.
(ROCK) speedy and heavy sound:
exaggerates bass and treble.
(POP) wide-ranged and deep sound:
slightly emphasizes bass and treble.
(VOCAL) clear sound:
emphasizes middle tone and slightly empha-
sizes treble.
Audio Settings
[VOL]
selects a value in the audio menu.
(PUSH SEL) (Push to Select)
selects items in the audio menu.
Clock display
1
Press [VOL] (PUSH SEL) to display the audio menu display.
Note: If no operation takes place for more than 5 seconds in the audio menu (2 seconds in Main volume adjustment),
the display returns to the regular mode.
2
Press [VOL] (PUSH SEL) to select a
mode to be adjusted.
(Setting Range: 0 to 40, Default: 18)
(blinks during scanning.)
(Setting Range: –12 dB to +12 dB by 2 dB,
Default: 0 dB)
(Setting Range: –12 dB to +12 dB by 2 dB,
Default: 0 dB)
(Setting Range: 15 levels each and 0 (center),
Default 0)
(Setting Range: 15 levels each and 0 (center),
Default 0)
Note: If the fader is set to front, the pre-amp. output
(rear) is decreased.
[D•M] (Direct Memory)
lights while receiving an FM stereo signal.
tunes into the station memorized in D•M.
(Hold it down for more than 2 seconds to
memorize the current station.)
(Stereo) indicator
[DISP] (Display)
CQ-C1105W
DISP
switches the information
on the display.
lights while receiving the D•M station.
6
3
4
5
SRC/PWR
[TUNE ]] [TUNE []
down/up the frequency. (Hold it down for
more than 0.5 seconds for seek tuning.)
Up to 6 stations can be preset in AM, FM1, FM2, and FM3
respectively.
Preset stations can be simply called up by pressing one of
the preset buttons from [1] – [6].
With this operation, stations with good receiving conditions
can be automatically stored in the preset memory.
1
3
2
Select a station.
Frequency adjustment
[TUNE]]: Lower
[TUNE[]: Higher
Note: Hold down either of them for more than 0.5
Note: New stations overwrite existing saved stations.
seconds and release it for station search.
Preset station selection
You can assign your favorite broadcasting station to the
Press the corresponding preset button from [1] – [6] to
[D•M] (Direct Memory) button. As the result of doing that,
tune in a preset station.
your favorite broadcasting station can be received even if
the unit is turned off, or the CD mode is activated.
1
Troubleshooting
[DISP] (Display)
If You Suspect Something Wrong
exits from the audio menu.
Check and take steps as described below.
If the described suggestions do not solve the problem, it is recom-
mended to take the unit to your nearest authorized Panasonic Service
Center. The product should be serviced only by qualified personnel.
Please refer the checking and the repair to professionals. Panasonic
CQ-C1105W
DISP
shall not be liable for any accidents arising out of neglect of checking
the unit or your own repair after your checking.
Never take measures especially for those other than indicated by
italic letters in "Check point" described below because those are
too dangerous for users to handle themselves.
Trouble
Common
3
Turn [VOL] clockwise or counterclock-
No power
wise to adjust.
Volume
q :
Up
w :
Down
No sound
Bass
q :
Increased
w :
Decreased
Noise
Treble
No sound from
left, right, front,
q :
Increased
or rear speaker
w :
Decreased
Left and right
Balance
sounds are
reversed
q :
Right enhanced
w :
Left enhanced
Radio
Fader
Frequent
q :
Front enhanced
noise
w :
Rear enhanced
Preset data
deleted
Display change
Frequency
Band
Preset Number
Press [DISP] to change the display.
Radio source display (Default)
Clock display
Manual station preset
1
Tune into a station.
2
Hold down one of the preset buttons from
Auto Preset Memory (APM)
[1]
–
[6]
for more than 2 seconds.
Select a band.
(blinks once.)
Hold down [BAND] (APM) for more than 2
seconds.
Note: New stations overwrite existing saved stations.
The preset stations under best receiving conditions are
received for 5 seconds each after presetting the stations
(SCAN). To stop scanning, press one of the preset but-
tons from [1] – [6].
D•M station writing
1
Select a station you would like to preset.
2
Hold down [D•M] for more than 2 seconds.
D•M station calling
Press [D•M].
Press again to cancel.
Warning
¡ Do not use the unit in an irregular condition, for example, with-
out sound, or with smoke or a foul smell, which can cause
ignition or electric shock. Immediately stop using the unit and
consult your dealer.
¡ Never try to repair the unit by yourself because it is dangerous
to do so.
Check point
Trouble
Check point
CD Player
●
Start the engine. (Or turn the ignition
No sound, or disc
●
Load the disc correctly.
switch to the ACC position.)
is automatically
●
Clean the disc.
●
Verify the wiring. (Ex. battery lead,
ejected
power lead, ground lead, etc.)
Sound skip,
●
Fuse blown (Contact the nearest
●
Panasonic Service Center.)
poor sound
Clean the disc.
●
Ask a professional for fuse replacement.
quality
●
Be sure to use the same rated fuse.
Sound skip
●
The maximum permissible tilt angle is
●
Disable the mute function.
due to
30°.
●
●
Verify the wiring.
vibration
Secure the unit.
●
Wait until the dew disappears before
●
u
turning on the unit.
Press [
] . If the disc is still not eject-
Disc not
ed, contact the nearest Panasonic
ejectable
●
Make sure that grounding is established
Service Center.
properly.
Error Display Messages
●
Adjust the balance and fader.
●
Verify the wiring.
(The disc is ejected automatically.)
The disc is dirty, or is upside down.
●
Connect the speaker lead correctly.
The disc has scratches.
●
Check the disc.
No operation by some cause.
●
Tune in to another station of high-
●
If normal operation is not restored, call
intensity waves.
the store where you purchased the unit
●
Make sure that the antenna mounted
or the nearest Service Center to ask for
point is grounded properly.
repairs.
●
The preset memory is cleared to return
to the original factory setting when the
power connector or battery is discon-
nected.
Advertisement
