Table of Contents
Advertisement
BASIC IMAGE RECORDING
IMPORTANT!
• Make sure your fingers and the strap do not block
the flash, microphone or lens.
• When aiming the camera, take particular care to
ensure that your finger is not blocking the phase
differential sensor.
Flash
Phase differential
sensor
NOTE
• Your image will be blurred if you move the camera
when pressing the shutter button. Press the shutter
button carefully, taking care to avoid camera
movement. This is especially important when
available lighting is low, which slows down the
shutter speed.
Microphone
Lens
Recording an Image
Your camera automatically adjusts shutter speed and
aperture values in accordance with the brightness of the
subject. Images you record are stored in the camera's built-
in memory, or to a memory card if you have one loaded in
the camera.
• When an optionally available SD memory card or
MultiMediaCard (MMC) is loaded in the camera, images
are stored on the card (page 201).
1.
Press the power
button to turn on the
camera.
• This causes an image or
a message to appear on
the monitor screen.
60
Power button
Advertisement
Table of Contents
