Rack-Mount And Ground The Chassis; Unpack And Inspect The Chassis - Cisco Firepower 2100 Series Hardware Installation Manual

Rack-Mount and Ground the Chassis

•
•
•
•

Unpack and Inspect the Chassis

Tip Keep the shipping container in case the chassis requires shipping in the future.
Note
The chassis is thoroughly inspected before shipment. If any damage occurred during transportation or any
items are missing, contact your customer service representative immediately.
See Package Contents, on page 5
Step 1 Remove the chassis from its cardboard container and save all packaging material.
Step 2
Compare the shipment to the equipment list provided by your customer service representative. Verify that you have all
items.
Step 3
Check for damage and report any discrepancies or damage to your customer service representative. Have the following
information ready:
• Invoice number of shipper (see the packing slip)
• Model and serial number of the damaged unit
• Description of damage
• Effect of damage on the installation
Unpack and Inspect the Chassis, on page 51
Rack-Mount the Chassis Using Brackets, on page 52
Rack-Mount the Chassis Using Slide Rails, on page 55
Ground the Chassis, on page 60
C H A P T E R
for a list of what shipped with the chassis.
Cisco Firepower 2100 Series Hardware Installation Guide
3
51