Positioning The Pressure Cuff - Panasonic EW3037 Operating Instructions Manual

Correction of the time and date
Turn off the unit. Press the Set button "1" on the side of the unit. Then
correct the time and date as described above.
• Please take care to reset the date during a leap year, as the 29th of
February will be displayed as the 1st of March.
When the batteries are removed, the date, time, and measurement record
are erased. Set the date and time again the next time you use the unit.
11

Positioning the Pressure Cuff

CAUTIONS:
• Do not use the unit for any purpose other than measuring blood
pressure. Also, do not use the unit in conjunction with other devices.
Improper use may cause a malfunction or personal injury.
• Keep the unit out of the reach of children.
1. Remove your watch and any jewelry from
your left hand.
2. Wrapping the cuff around the wrist and
securing with hook-and-loop fastener.
Leave main unit at the distance of 2 cm (3/4")
from the first wrinkle line of wrist-palm joint,
mount the cuff on the wrist in such way as the
center of the main unit locates at the center of
the wrist (Fig. 5-a).
3. Attach the right thumb on the harder part
intensely from the side so that the right side
of the cuff is sure to be fixed on the side face
of the wrist, secure and attach the hook-and-
loop fastener snugly until not feeling it
oppressed.
Confirm the both center of wrist and main unit
is still on the same line, and tightness of the
fixing (Fig. 5-c).
• Pull up on the fastener,
without twisting it, to
remove the unit from
your wrist.
Fig. 5-a
First wrinkle line of
wrist-palm joint
Center of the wrist
Fig. 5-b
Fig. 5-c
Center of the main unit
Center of the wrist
Harder of the cuff
(Outside: Hook fastener)
2 cm (3/4")
Loop fastener
12