Panasonic KX-PS8100 Operating Instructions Manual page 92

Panansonic operating instructions digital color imaging system kx-ps8100
Table of Contents

Advertisement

Connecting the Printer to a Network
92
5
Expand the levels to locate your printer and the queue
you want to print to.
If your printer has a hard disk drive and 32 MB of memory, three
32
connections will automatically be created when the KX-PS8100
printer driver is installed. These connections are represented on the
network by the Direct, Print and Hold printer icons. If your printer
does not have a hard disk drive and 32 MB of memory, only the
Direct printer icon will be available.
If the Hold queue is specified, all jobs sent to the printer will be held
on the printer's hard disk and will be visible in the WebSpooler
window until they are printed or deleted.
The printer you are browsing for is the SMB Name Server. If you do
not know the name of the SMB Name Server and SMB printing has
been enabled on the printer, see the printer's Configuration page for
this information.
For instructions on printing a Configuration page,
pages from the printer panel" on page
NOTE:
If the local network does not include a WINS server, your printer
may not be visible in the Browse window. In this case, you must
type the correct path for the print connection in the "Specify the
network path to the printer" box of the Add Port window, for
example: \\KX-PS8100\direct.
6
Under the printer's name, select the queue you wish to
print to and click [OK].
7
In the Add Port window, verify that the network path is
correct and click [OK].
see "Printing
202.

Advertisement

Table of Contents
loading

Table of Contents