Panasonic KX-PS8100 Operating Instructions Manual page 56

Setup
56
To load labels in the multi-purpose tray:
For detailed information on labels,
page 293.
1
Set the media thickness switch
2
Adjust the media guides to the width of the label sheets.
3
Insert label sheets in the multi-purpose tray with the
printing side up and insert the top of the sheets first.
The height of labels should not exceed the limit mark on the guide.
4
Choose MPT Label as the paper source in the Paper
tab of the printer driver.
NOTE:
•
Avoid printing labels if the temperature is too high; doing so may damage
consumables.
see " Transparencies and labels" on
(see page 52).