Panasonic DP-C323, DP-C263, DP-C213 Operating Instructions Manual page 211

Info. code Problem
716 Cannot logon to the designated
SMTP Server.
717 Incomplete SMTP Protocol
transmission. SMTP Server's
hard disk may be full.
718 Page Memory Overflow
occurred while receiving printing
data. The paper size selected
within your application to print is
larger than the paper size
loaded in the cassette(s).
719 Received data via LAN is in a
format that is not supported.
720 Cannot connect to the POP
Server. (Incorrect POP Server IP
Address) POP Server is down.
721 Cannot connect to the POP
Server. (User Name or
Password error)
722 Failed to obtain IP address from
the DHCP server.
725 DNS Server connection timed
out. DNS Server is down.
726 Received an error response
from the DNS Server.
728 Communication error occurred
with the SMTP Direct
transmission.
729 Failed to authenticate (SMTP
Authentication) when connecting
with the SMTP server.
730 Cannot retrieve the Journal nor
program the Internet Parameters
and the Auto Dialer remotely via
email from a PC.
731 The dialer buffer for manual
dialing was full (70 stations)
when the Relay Transmission
Request was received.
Action
Check the SMTP Server IP Address setting.
Contact the Network Administrator.
SMTP Server is defective.
Contact the Network Administrator.
Check the document size and resolution.
Ask originator to re-send in a supported size
and resolution.
Ask the originator to re-send with a supported
file attachment format:
* In a TIFF-F format.
* Image data conforming to recording paper
size.
Check the POP Server IP Address.
Contact the Network Administrator.
Check the POP User Name, and Password, or
the APOP settings.
Contact the Network Administrator.
Check the 10Base-T/100Base-TX cable
connection.
Confirm that the Internet Parameter, and the
DHCP server are correctly configured before
turning on, or turning off the power.
Contact the Network Administrator.
Check the DNS Server IP Address.
Contact the Network Administrator.
Check the POP Server Name.
Check the SMTP Server Name.
Check the remote station.
Check the SMTP Authentication. User Name
and Password.
Contact the Network Administrator.
Check that the Fax Parameter "158 PC
Remote Update" is set to "Valid".
Request the originator to re-send the Relay
Transmission Request after the reserved
communication is finished.
Refer to
Operating
Instructions (For
Setting Up)
Operating
Instructions (For
Setting Up)
Operating
Instructions (For
Setting Up)
Operating
Instructions (For
Setting Up)
Operating
Instructions (For
Setting Up)
Operating
Instructions (For
Setting Up)
Operating
Instructions (For
Function
Parameters)
Operating
Instructions (For
Function
Parameters)
211