Requesting A Relayed Transmission From A Computer - Panasonic DP-C323, DP-C263, DP-C213 Operating Instructions Manual

Requesting a Relayed Transmission from a Computer

Requesting a relayed transmission, fill the field in your mailer that corresponds to the destination (To) in
the following manner:
Sample entry:
sg-rly#8133111234@singapore.panasonic.co.sg
Entry example
sg-rly
#8133111234
After @
When relayed transmission completes, a communication journal is Emailed to the initial sending station, and a
fax relay log is emailed to the administrator computer that is pre-programmed in "37 Manager's Email Addr" of
the relay station.
Enter the Relay XMT Password. (It must match the Relay XMT Password pre-
programmed in the relay station.)
Enter the telephone number of the fax station.
In addition to the telephone number, address book information may be entered between #
to @.
If a pause is required in dialing an outside line from an extension by using a PBX
(exchange) or similar equipment, enter a hyphen (-) in place of the fax number.
The host and domain names registered with the DNS server.
Explanation
153