About The Controls On The Air Conditioner; Controls - Quasar HQ-2243TH Installation And Operating Instructions Manual

About the Controls on the Air Conditioner

The controls will look like one of the following.

Controls

• OPERATION
Off - Turns air conditioner off.
Med Fan - Med speed fan operation without cooling.
Low Fan - Low speed fan operation without cooling.
High Cool - Cooling with high speed fan operation.
Med Cool - Cooling with med speed fan operation.
Low Cool - Cooling with low speed fan operation.
• THERMOSTAT
This automatically controls the temperature of the
indoor air.
Turn the knob so that arrow points to the higher
number for greater cooling. Point the arrow to the
lower number for more moderate cooling.
• FOR NORMAL COOLING
1. Turn the Operation Knob to the High Cool or the
Low Cool setting.
2. Set the Thermostat control to the desired
temperature mark 5 (the mid-point is a good
starting position).
If the room temperature is not satisfactory after a
reasonable time, adjust the control to a cooler or
warmer setting, as appropriate.
When the air conditioner has performed its cooling operation and is turned off or set to the fan
position, wait at least 3 minutes before resetting to the cooling operation again.
• FOR MAXIMUM COOLING
1. Turn the Operation Knob to the High Cool setting.
2. Set the Thermostat control to the highest
temperature mark (9).
• FOR QUIETER OPERATION
1. Turn the Operation Knob to the Low Cool setting.
2. Set the Thermostat control as needed.
• AIR SWING
ON - Air swing is operated while OPERATION Knob
is set to the COOL position.
OFF - Stops the operation of air swing.
CAUTION
5