Flash Streamer (Air Cleaning) Operation; To Start/Stop Flash Streamer (Air Cleaning) Operation; Clock And Timer Setting; The Clock Setting - Daikin FTXJ20A2V1BW Operation Manual

5.9 Flash Streamer (air cleaning)
operation
Streamer generates a high-speed electron stream with a high
oxidizing power, reducing bad odours. Together with the titanium
apatite deodorising filter and the air filters, this function cleans the air
in the room.
INFORMATION
▪ The high-speed electrons are generated and go away
inside the unit to ensure safe operation.
▪ The Streamer discharge may generate a fizzing sound.
▪ If the airflow becomes weak, the Streamer discharge
may stop temporarily to prevent ozone smell.
5.9.1 To start/stop Flash Streamer (air cleaning)
operation
1 Press to enter the main menu. The Flash Streamer screen
is on the first position of the main menu.
2 Change the setting using
Flash Streamer operation
active
3 Press to confirm your selection.
Result: Flash streamer operation active:
bottom of the home screen.
Result: Flash streamer operation disabled:
from the bottom of the home screen.
5.10

Clock and timer setting

1 Enter the main menu by pressing
and timer setting menu using
menu.
Clock and timer setting menu
2 In this menu, perform the following clock and timer setting.
Then press to return to the main menu or press
to the home screen.
5.10.1

The clock setting

If the indoor unit's internal clock is NOT set to the correct time, the
ON timer, OFF timer and weekly timer will NOT operate correctly.
The clock must be set again:
▪ After a circuit breaker has turned the unit OFF.
▪ After a power failure.
▪ After replacing batteries in the wireless remote control.
To set the clock
1 In the clock and timer setting menu, navigate to the clock
setting screen using and
FTXJ-A(W)(S)(B)
Daikin room air conditioner
3P485919-15W – 2021.12
and .
Flash Streamer operation
disabled
appears on the
disappears
and navigate to the clock
and . Press to enter the
to exit
. Enter the setting using .
Clock setting (displays current clock setting)
Note: If the time was not yet set, you will first enter the clock setting.
No other timer setting can be done until the clock is set.
2 Change the day of the week using
Day of the week setting
3 Go to the hours setting using
Hours setting
4 Change the hour using
5 Go to the minutes setting using
Minutes setting
6 Change the minutes using
5.10.2

OFF/ON timer operation

Timer functions are useful for automatically switching the air
conditioner off/on at night or in the morning. You can also use OFF
timer and ON timer in combination.
INFORMATION
Program the timer again in case of:
▪ A breaker has turned the unit off.
▪ A power failure.
▪ After replacing batteries in the wireless remote control,
the remote control keeps the time setting for the ON/
OFF timer, but the timer is cancelled.
INFORMATION
The clock MUST be set correctly before using any timer
functions. Refer to "To set the
To start/stop OFF timer operation
1 In the clock and timer setting menu, navigate to the OFF timer
screen using and .
OFF timer disabled
2 Press to enter the OFF timer setting menu.
5 Operation
TUE
12:25
and .
MON
0:00
.
TUE
0:00
and (24-hour format).
.
TUE
12:00
and .
clock" [ 4 13].
OFF timer set to 7:00
14:00 7:00
Operation manual
13